ADJUSTMENT OF CURVE
Climate system 1
Outdoor temp °C
Supply temp °C
Min supply temperature
Max supply temperature
Curve offset
Curve coefficient
Climate system
Max
Min
1.
Select the climate system (if more than one) for
which the curve is to be changed.
2.
Select curve slope and curve offset.
3.
Select max and min supply temperature.
Caution
Curve 0 means that own curve is used.
Settings for own curve are made in menu
1.30.7.
TO READ OFF A HEATING CURVE
1.
Drag in the circle on the axis with outdoor temperat-
ure.
2.
Read off the value for supply temperature in the
circle on the other axis.
NIBE S1155Chapter 6 | Commissioning and adjusting34
To Next Page
Loading...
