Quick guide
Navigation
Ok button (confirm/select)
Back button (back/undo/exit)
Control knob (move/increase/reduce)
A detailed explanation of the button functions can be found on page 37.
How to scroll through menus and make different settings is described on page 39.
Set the indoor climate
2X
MY INSTALLATION
INDOOR CLIMATE
HOT WATER
INFO
The mode for setting the indoor temperature is accessed by pressing the OK button twice, when in the start
mode in the main menu.
Increase hot water volume
2X
1X
INDOOR CLIMATE
HOT WATER
MY INSTALLATION
INFO
To temporarily increase the amount of hot water (if a hot water heater is installed to your SMO 40), first turn
the control knob to mark menu 2 (water droplet) and then press the OK button twice.
To Next Page
Loading...
