Caution
If comfort mode "luxury" is selected in menu 2.2 no further increase can
be carried out.
The function is activated immediately when a time period is selected and
confirmed using the OK button. The remaining time f or the selected setting
is shown to the right.
When the time has run out VVM 310 returns to the mode set in menu 2.2.
Select “off" to switch off temporary lux .
comfort mode
HFRQRP\
FRPIRUW PRGH
QRUPDO
OX[XU\
Setting range: economy, normal,
luxury
Default value: normal
Menu
2.2
The difference between the selectable modes is the temperature of the
hot tap water. Higher temperature means that the hot water lasts longer.
economy: This mode gives less hot water than the other, but is more
economical. This mode can be used in smaller households with a small hot
water requirement.
normal: Normal mode gives a larger amount of hot water and is suitable
for most households.
luxury: Lux mode gives the greatest possible amount of hot water. In this
mode, the immersion heater, as well as the compressor, is used to heat
hot water, which may increase operating costs.
scheduling
What hot water comfort the indoor module is to work with can be
scheduled here for up to two different time periods per day.
Menu
2.3
Scheduling is activated/deactivated by ticking/unticking"activated". Set
times are not affected at deactivation.
37NIBE™ VVM 310Chapter 3 | VVM 310 – at your service
To Next Page
Loading...
