7 - English
EN
Press and release key “A” of the receiver
Release key “A” of the receiver
Press and release the desired transmitter key
Hold down the desired transmitter key
Release the desired transmitter key
Read the control unit’s instruction manual
...
Observe when LED “B” emits signals
The system can be programmed in Mode 1 or in Mode 2: see Paragraphs 3.1 and 3.2.
3.1 - Memorisation in “Mode 1”
While Procedure 1 is being carried out, the receiver memorises all the keys present on the transmitter, auto-
matically assigning command 1 of the receiver to the 1
st
key, command 2 to the 2
nd
key, and so forth. Once the
To Next Page
Loading...
Need help?
General
