EN
English – 13
The control unit is totally assembled and wired, ready for
connection.
The control unit is to be kept inside its packaging during
transport and storage, if any, in order to prevent any
damage.
For disposal, it is necessary to separate
− metals
− plastic elements
− electrical components
− lubricants.
TRANSPORT / STORAGE / DISPOSAL
TECHNICAL ASSISTANCE / SPARE PARTS /
ACCESSORIES
We specifically clarify that we neither carry out tests nor are
we willing to approve any spare parts and/or accessories
not supplied by us.
The assembly and/or use of non-conforming products
could jeopardise control unit features pre-defined at the
construction level, which can reflect on safety.
NICE declines all responsibility and disclaims any warranty
whatsoever for damages, if any, caused by using non-
original spare parts and/or accessories.
Defects that cannot be remedied internally are to be
eliminated only by the door manufacturer or another
specialised company, from which it is possible to also
request any necessary spare parts.
WARNINGS
• All of the technical characteristics indicated refer to a temperature of 20°C (± 5°C).
• Nice reserves the right to introduce all modications to the product it deems necessary at any time, however keeping the functions and intended use
unaltered.
TECHNICAL DATA - FEATURES
UDL 2
DATA DESCRIPTION
Voltage power supply: from 3x200V to 3x415V AC 50Hz, with fuse 3x6.3 HV
ATTENTION: Use only fuses filled with sand!
Fuse in place: 3x 16A
Internal fuse: 3x 6.3A
Connection terminals: 1.5 mm² max.
Hydraulic motor connection: 3 NO relay contacts, 400V/max. 1.2kVA
Power at rest: < 3VA
Ambient temperature: from -20° to +50°C
Protection rating: IP 54
Dimensions: 255 x 120 x 180mm (HxDxW)
To Next Page
