6 Digitax ST Installation Guide
Issue: 7
Dec laration of Conf ormit y
(including 2006 Machinery Directive)
This declaration applies to the Unidrive SP and Digitax ST variable speed drive product ranges,
comprising model numbers composed as shown below.:
This declaration relates to these products when used as a safety component of a machine.
Only the Safe Torque Off function may be used for a safety function of a machine. None of
the other functions of the drive may be used to carry out a safety function.
These products fulfil all the relevant provisions of Directive 2006/42/EC (The Machinery Directive).
They also fulfil all the relevant provisions of Directives 2004/108/EC (The EMC Directive) and 2006/
95/EC (The Low Voltage Directive).
EC type-examination has been carried out by the following notified body:
IFA
Alte Heerstraße 111
53757 Sankt Augustin
Germany.
Notified Body identification number: 0121
EC type-examination certificate number: IFA 1001123
The schedule attached to the certificate specifies the product model numbers which have been
subjected to type examination.
The harmonized standards used are shown below:
Control Techniques Ltd
The Gro
Newtown
Powys
UK
SY16 3BE
SP(ab)cdef Valid characters: DSTabcde Valid characters:
ab Absent or MD a 1
c 0 1 2 3 4 5 6 7 8 9 b 2 4
d 2 4 5 6 c 0
e 0 1 2 3 d 1 2 3 4 5
f 1 2 3 4 5 6 7 e B I P Z E
DIN EN 61800-5-1:2008
Adjustable speed electrical power drive systems. Safety
requirements. Electrical, thermal and energy
DIN EN 61800-5-2:2008
Adjustable speed electrical power drive systems. Safety
requirements. Functional
DIN EN ISO 13849-1:2008
Safety of machinery. Safety-related parts of control systems.
General principles for design
DIN EN ISO 13849-2:2008
Safety of machinery. Safety-related parts of control systems.
Validation
To Next Page
Loading...
Need help?
General