nifty SP45 - Page 42

SP Series
Operating & Safety Instructions
USA – 11/14
Original instructions
40
TILT ALARM
PASS
FAIL
N/A
Booms raised on slope - drive disabled, siren tone constant
Boom operation unaffected
Booms lowered - drive restored
INTERNAL (POWER PACK)
Power pack and all components secure
All cables and terminals secure
All hose connections secure
Hoses not kinked or fouled
Charger/control box secure
Batteries secure
Electrolyte level and specific gravity
Charger operation (If applicable)
Hydraulic oil level
Engine/Gearbox oil
FINISH
Pivot pin tag bolts
Correct decals, all visible
Canopy/bonnets
Grease nipples (Feet, Knuckle, Centre Post)
LEAK CHECK
Cylinders (Lift, Jacks, Telescope, Levelling)
Control valves
Check valves
Power pack/pump
Rotation motor
Hose connections
Filter
Wheel motors
Comments, remedial work required etc;
INSPECTED BY: DATE: / /