nifty SP45 - Ground Control Functions and Operation

SP Series
Operating & Safety Instructions
USA – 11/14
Original instructions
22
4.2 GROUND CONTROL OPERATION
4.2.1 GROUND CONTROL FUNCTIONS
1 Emergency Stop
Push to Stop Operation
Twist to Enable Operation
2 Green Power Button
Push and hold for Power
Release to Cease operation
3 Red Lamp
Indicates Safe Working Load limit or Maximum Tilt Angle
exceeded. Safely remove any unnecessary items from the basket
or lower booms to stowed position and drive on to level ground to
restore machine functions.
4 Green Lamp
Indicates machine is switched on. Lamp will extinguish during a
safety critical condition when red lamp (3) is flashing.
5 Engine Glow & Start/Stop
Anti-clockwise for Glow, Clockwise to Start/Stop engine
6 Base/Basket Selector
Clockwise for Basket, Centre for Base, 0 for all power off
7 Auxiliary Powered Descent
(OPTIONAL)
Push and hold to enable boom functions in the event of normal
operation loss. (i.e. Fuel tank empty)