Nightfox PROWL - Settings Mode Configuration

English
9
12. Settings mode
• To enter Settings mode, press M until the Settings menu is
displayed.
• Use IR and IR to navigate the menu. Press REC/OK to select a
menu option.
Setting
Description
Night filter
Select “Black and White” or “Green” for night time use.
Selecting “Green” will apply a green filter to the image,
imitating the phosphor green effect found on image
intensifier night vision devices.
IR settings
Select 850nm, 940nm, a combination of both or no IR.
Autohide
icons
Turn on or off autohide icons on LCD screen.
Format SD
Delete all files currently on the micro SD card.
Power save
Set the device to power-off after a period of non-use. If
enabled, the options are 30 or 60 minutes.
Date
and
Time
The date and time are in the format YYYY / MM / DD,
HH:MM:SS.
Press REC/OK to begin amending the selected number.
Use IR and IR to adjust the values. Press REC/OK to
set the number and IR to move onto the next field.
Once the date is correct, press REC/OK again to save
and M to return to the settings menu.
Flicker
Determines the refresh rate of the LCD screen. The
device arrives with the correct setting for its
geographical area.
Date/time
tag
Choose whether a date and time stamp is included in
recorded videos.
Frame rate
Pick the frame rate of the AVI video recordings produced. A
higher frame rate may improve video quality but will
increase the video size.
Factory
reset
Restores all settings to factory defaults.
Version
Shows the current firmware version.