Nightfox PROWL - Infrared (IR) LED Usage Tips; Playback Mode Operation

English
8
10. Important tips for using the infrared LEDs
• The Prowl has two IR LEDs: a 940nm wavelength for stealth, and
an 850nm wavelength for range.
• All IR LEDs produce a red glow, visible to the human eye. 940nm
LED produces less glow than 850nm LED, but 850nm provides a
longer viewing range than 940nm.
• The Prowl’s default factory setting uses 940nm for IR levels 1-3,
and 850nm for IR levels 4-5. Alternative options are available by
entering Settings mode (see section 12).
• Important: other night vision devices can detect the IR light
emitted by the Prowl.
• In dark environments with some ambient light, use the
“Lunarsight” setting (IR:0) to use no IR LED at all.
• Reducing usage of the IR LEDs saves battery.
11. Playback mode
• Press M until shows on the top left-hand corner of the
screen.
• The LCD screen will show the last file saved. Press IR to go to
the previous file, and press IR to go to the next file.
• Press REC/OK to enter the playback menu and use IR and IR
to navigate. Use REC/OK to select from the menu options,
which are to:
› play the selected video
› delete the selected video
› delete all videos
› exit the menu
• Selecting either ‘delete’ option will cause a thumbnail of the
image to appear with a pop-up menu, requesting confirmation
before deletion.