English
7
8. Modes overview
• The Prowl has three modes. Press M to switch from one mode to
the next. The modes are:
› Video mode, for recording videos. This is the default
mode when the device is turned on. See section 9.
› Playback mode, for watching and deleting videos stored
on the memory card. See section 11.
› Settings mode, for configuring settings. See section 12.
9. Video mode
• Video mode is the default mode when the device powers on.
• Adjust the camera focus by turning the dial at the front of the
device.
• The top right of the LCD screen shows how much space is left
for recording video onto the memory card, in HH:MM:SS.
• For daytime use, ensure IR is set to off, with no icon on the
display and the picture in colour.
• For night use, turn on the IR by pressing IR. Increase the level
of the IR LED by pressing IR up to level 5.
• Press REC/OK to start/stop recording. When recording is
stopped, the video is automatically saved onto the memory
card.
• Press to digitally zoom up to 3x magnification.
• The default setting uses 940nm IR LED for IR 1 to 3, and 850nm
IR LED for IR 4 to 5. With 940nm IR LED, the "red exposure" is
less obvious; however the brightness may be lower than 850nm.
To change this setting, press M twice to enter the settings
menu, and select "IR Settings".
To Next Page
Loading...
