Nikon 1 v3 Reference Manual

112
t
A
Optional Flash Units
Detailed instructions may be found in the manual provided with the
flash unit. Note that optional flash units may not fire at some camera
settings.
A
The Flash/Capture-Illuminator Status Indicators
Users of the SB-N5 are directed to check the table below if the flash sta-
tus or capture-illuminator status indicator on the rear of the unit
flashes. Users of the SB-N7 may refer to the manual provided with the
flash unit.
Display Description
The flash status indicator flashes
for about 3 seconds after a photo-
graph is taken.
Subject may be underexposed. Try again
after reducing distance to subject or rais-
ing ISO sensitivity (0 201).
The flash or capture status indica-
tor flashes once a second.
Product has fired several times in quick
succession and has shut down tempo-
rarily to prevent overheating. Turn prod-
uct off and wait for it to cool.
The flash and capture status indi-
cators flash once every 2 seconds.
A data transfer error has occurred. Check
that the flash unit is correctly attached.
The flash status indicator flashes
8times a second.
An error has occurred in the unit’s inter-
nal circuitry. Turn the camera off, remove
the flash unit, and take the camera and
flash unit to a Nikon-authorized service
center for consultation.

Nikon 1 v3 Specifications

General

Sensor	CMOS
ISO Range	160-12800
Continuous Shooting	Yes
Display Resolution	1, 037, 000 dots
Battery Life	310 shots (CIPA)
Camera Type	Mirrorless
Image Resolution	18.4 MP
Lens Mount	Nikon 1 mount
Image Processor	EXPEED 4A
Sensor Size	13.2 x 8.8 mm
Autofocus System	Hybrid autofocus (contrast-detect/phase-detect)
Continuous Shooting Speed	20 fps
Video Recording	1080p at 60/30 fps
Display	Tilting LCD
Connectivity	Wi-Fi
Shutter Speed	30 s to 1/16000 s
Viewfinder Type	Optional electronic viewfinder
Storage Media	microSD/SDHC/SDXC
Battery	EN-EL20a rechargeable Li-ion
Weight	324 g (including battery and memory card)
Dimensions	110.9 x 65 x 33.2 mm