Nikon 1 v3 Reference Manual

211
g
Select Ye s to format the memory card. Note that this permanently
deletes all data on the card, including protected images; before
proceeding, be sure to copy important pictures and other data
to a computer (0 145). To exit without formatting the memory
card, highlight No and press J.
If Enable release is selected, the shutter can be released when
no memory card is inserted. No pictures will be recorded,
although they will be displayed in demo mode. Select Release
locked to enable the shutter only when a card is inserted.
Adjust the following display options.
Display Brightness
To adjust the brightness of the monitor,
select Display brightness and press 1
or 3. Choose higher values to brighten
the display and lower values to make the
display darker.
Format Memory Card
The message shown at right is displayed
while the card is formatted; do not remove
the memory card or remove or disconnect
the power source until formatting is com-
plete.
Slot Empty Release Lock
Display

Nikon 1 v3 Specifications

General

Sensor	CMOS
ISO Range	160-12800
Continuous Shooting	Yes
Display Resolution	1, 037, 000 dots
Battery Life	310 shots (CIPA)
Camera Type	Mirrorless
Image Resolution	18.4 MP
Lens Mount	Nikon 1 mount
Image Processor	EXPEED 4A
Sensor Size	13.2 x 8.8 mm
Autofocus System	Hybrid autofocus (contrast-detect/phase-detect)
Continuous Shooting Speed	20 fps
Video Recording	1080p at 60/30 fps
Display	Tilting LCD
Connectivity	Wi-Fi
Shutter Speed	30 s to 1/16000 s
Viewfinder Type	Optional electronic viewfinder
Storage Media	microSD/SDHC/SDXC
Battery	EN-EL20a rechargeable Li-ion
Weight	324 g (including battery and memory card)
Dimensions	110.9 x 65 x 33.2 mm