75
#
2
Choose a shutter speed.
Select mode w and choose a shutter
speed as follows:
• Bulb: Rotate the main command dial
left until “Bulb” is selected for shutter
speed.
• Time: Rotate the main command dial
left until “Bulb” is selected for shutter
speed, and then press 4 (C) and
select a remote control mode (0 96).
3
Open the shutter.
Bulb: After focusing, press the shutter-release button all the
way down. Keep the shutter-release button pressed until the
exposure is complete.
Time: Press the ML-L3 shutter-release button all the way down.
The shutter will open immediately or after a two-second
delay.
4
Close the shutter.
Bulb: Take your finger off the shutter-release button.
Time: Press the ML-L3 shutter-release button all the way down.
Shooting ends automatically after about two minutes. Note that
some time may be required to record long exposures.
Main command dial
To Next Page
Loading...
