Set
Record
GPS
data
to
On in the
GPS
menu
to
change the valid storage period
for recording positional information
onto
a picture or manually update the
positional information.
You
can
also
use
the signal transmission from the
GPS
satellites
to
set the
date/time
of
the built-in clock
in
the camera.
GPS
menu
Record
GPS
data
ON
Valid
storage
period
•
1m
~--
Synchronize
Valid Storage Period
Ifapicture
is
shot while positioning cannot be done, the last positional information
will be recorded
onto
the picture.
As
a result, a margin
of
error will occur between
the shooting location and the recorded positional information.
Set
Valid storage period
to
reduce the margin
of
error with the shooting location.
Choose the valid storage period from
15
seconds
or
less,
30
seconds
or
less,
1
minute
or
less (default setting), 5 minutes
or
less,
15
minutes
or
less,
30
minutes
or
less,
60
minutes
or
less,
or
2 hours
or
less.
If positioning cannot be done after the valid storage period
has
ended, the
positional information will
not
be recorded
onto
the picture.
Update
GPS
Data
Positioning
is
updated automatically,
but
Update
GPS
data
can
be used
to
update
manually.
1 Use
the
multi selector to choose
Update
GPS
data
from
the
GPS
menu, and
press
the
®
button.
c
VI
2 Choose
Yes
and
press
the ® button.
• Updating
of
positional information begins.
• When the updating
is
complete, Update complete
is
displayed on the screen and the
monitor
display returns
to
the
GPS
menu.
•
To
cancel the update operation, choose No,
63
To Next Page
Loading...
