E72
Reference Section
Blink Warning
Select whether or not the camera detects human subjects that have blinked using face
detection (A58) when shooting in the following modes:
• x (scene auto selector) mode (A32)
• Portrait, or Night portrait in scene mode (A33).
• A (auto) mode (when Face priority (E37) is selected for AF area mode option)
The Blink Warning Screen
Faces detected by the blink warning are displayed inside a border.
The operations described below are available.
• To enlarge the face: Move the zoom control toward g (i). If
more than one face is detected, use the multi selector JK
to select the desired face.
• To switch to full-frame playback: Move the zoom control
toward f (h).
If you press the k button, or if no operations are performed
for a few seconds, the camera returns to shooting mode.
B Notes About Blink Warning
• The blink warning is disabled at continuous settings other than Single (E33).
• The blink warning may not function properly in some shooting conditions.
Press the d button M z menu icon M Blink warning M k button
Option Description
On
When one or more human subjects may have blinked in an image
captured using face detection, the Did someone blink? screen is
displayed in the monitor.
Check the image and determine whether or not another image should
be captured.
Off
(default setting)
Blink warning is disabled.
Did someone blink?
ExitExitZoom inZoom in
To Next Page
Loading...
Need help?
General
