32
Scene Mode
Make selection (to return to step 3,
press center of multi selector again).
Pan direction displayed in white. Yel-
low AE-L icon shows that white balance
and exposure will lock with fi rst shot.
4
Select how pictures will be joined to-
gether in completed panorama. This
is the direction in which camera will be
panned after each shot.
3
Take fi rst shot. About
1
/
3
of picture is
superimposed on view through lens (if
pan direction is left to right, picture will
appear on left side of monitor). AE-L
icon turns white to show that white
balance and exposure settings for this
picture apply to all shots in series.
5
8
End series. Shooting will also end if a
new mode is selected or camera enters
standby mode.
7
Take next shot. Repeat steps 6–7 un-
til all shots in series have been taken.
6
Compose next shot to overlap with
previous picture.
2
Default pan direction displayed.
1
PANORAMA ASSIST
To Next Page
Loading...
