Why do randomly spaced bright pixels (“noise”) appear in images on my Nikon COOLPIX S4400 Digital Camera?
Randomly spaced bright pixels (“noise”) appear in images on your Nikon Digital Camera because the shutter speed is too slow or the ISO sensitivity is high in dark conditions. Noise can be reduced by using flash or specifying a lower ISO sensitivity setting.
Why do randomly spaced bright pixels (“noise”) appear in movies on my Nikon Digital Camera?
When recording movies in dim lighting, the image may become somewhat “grainy” in appearance on your Nikon Digital Camera.
What to do if I get unexpected results when flash set to b (Auto with red-eye reduction) on my Nikon Digital Camera?
When taking pictures with auto with red-eye reduction flash or fill flash with slow sync and red-eye reduction in Night portrait scene mode, In-Camera Red-Eye Fix may be applied to areas not affected by red-eye. Use any scene mode other than Night portrait, and change the flash mode to any setting other than auto with red-eye reduction and try shooting again.
Why are skin tones not softened on my Nikon Digital Camera?
Under some shooting conditions, facial skin tones may not be softened on your Nikon Digital Camera. Select Skin softening for Glamour retouch in the retouch menu for images containing four or more faces.
Why does saving images take time on my Nikon Digital Camera?
It may take more time to save images on your Nikon Digital Camera when the noise reduction function is in operation, when the flash mode is set to auto with red-eye reduction, or when the skin softening function is applied while shooting.
Why do colored circles or light streaks appear in the monitor or images of my Nikon Digital Camera?
When shooting with backlighting or when a very strong light source (such as sunlight) is in the frame, colored circles or light streaks (ghosting) may occur on your Nikon Digital Camera. Change the position of the light source, or frame the picture so that the light source does not appear in the image.
Why is the PictBridge startup screen not displayed when my Nikon COOLPIX S4400 Digital Camera is connected to a printer?
If the PictBridge startup screen is not displayed when connecting your Nikon Digital Camera to a printer, and Auto is selected for 'Charge by computer' in the setup menu, set the 'Charge by computer' option to Off and reconnect the camera to the printer.
What to do if my Nikon COOLPIX S4400 Digital Camera is on but does not respond?
If your Nikon Digital Camera is on but not responding, first wait for any recording to finish. If the problem continues, turn the camera off. If it still doesn't turn off, remove and reinsert the battery or, if using an AC adapter, disconnect and reconnect it.
Why is my Nikon Digital Camera battery not charging when inserted in the camera?
If the battery isn't charging when inserted in your Nikon Digital Camera, check that all plugs are correctly connected. Also, ensure that 'Charge by computer' is not set to 'Off' in the setup menu. If charging via computer, charging stops when the camera is turned off or if the computer is suspended (sleeping). Note that depending on computer specifications, charging may not be possible via computer connection.
Why does the flash not fire on my Nikon COOLPIX S4400?
The flash on your Nikon Digital Camera may not fire because: * The flash mode is set to Off. * A scene mode with which the flash does not function is selected. * On is selected for Blink proof in smart portrait mode. * Another function that restricts flash is enabled.
General| Type | Compact digital camera |
|---|---|
| Image Sensor | 1/2.3-in. type CCD |
| Effective Pixels | 20.1 million |
| Optical Zoom | 6x |
| Digital Zoom | 4x |
| Video Recording | Yes |
| Focal Length | 4.6-27.6 mm (angle of view equivalent to that of 26-156 mm lens in 35mm [135] format) |
| Storage Media | SD/SDHC/SDXC |
| Battery | EN-EL19 |
| Maximum Video Resolution | 1280 x 720 |
To Next Page