Nikon CoolPix S8100 - Indicators Displayed in I_1 (Auto) Mode

Indicators Displayed in I_1(Auto) Mode
Vibration reduction icon
[Vibration reduction can be
applied to reduce the effects
"Shooting mode "_ r-=----I of camera shake,
disp]ayed in I_1 H _ I "
(auto) mode.
• Movie options _}
A movie option is displayed |
for movie recording (_ 129, /
134). ,)
_.nternal mernory indicator _ flrnage mode
Indicates that images will be saved on the [ lThe combination of image l
camera's internal memory (approximately | [quality (compression) and image[
102 MB). [ [size is displayed. The default /
When a memory card is inserted in the camera, []]]I [,setting is % 4000 x 3000. )
does not appear and images will be saved on the[
memory card. )
• The indicators and photo info displayed during shooting and playback will turn
offafter a few seconds (_ 163).
• When the monitor has turned off in stand by mode to save power (the power-
on lamp is blinking) (_ 171), press the following buttons to turn it back on.
-, Power switch or Shutter-release button
F,"
0
o_
D
o_
o_
to
[] Functions Available in I_1 (Auto) Mode
• The flash mode (_ 30) can be adjusted, the selfitimer (_ 33) and macro mode (_ 36) can be
applied,
• Brightness (exposure compensation), vividness, and hue can be adjusted with the creative slider
(_ 37),
• Press the MENUbutton to specify settings for all shooting menu items (_ 43) according to
shooting conditions, The combination of image quality (compression) and image size can be set
by using the Image mode option in the shooting menu.
[] Vibration Reduction
• Bee Vibration reduction (_ ]66) in the setup menu (_ 157) for more information,
• Bet Vibration reduction to Off when using a tripod to stabilize the camera during shooting,
23