VAA46003-R.3659.A
- A10 ･ E7900 -
・ Lubricate the contact surface of the barrier turn plate #663 and the 1st lens group barrel #615 with the oil MZ-800S.
Then, set them to each other.
・ Set the blade opening spring #669 onto the 1st lens group barrel #615 and the barrier turn plate #663.
#663
#669
#615
Barrier turn plate
Blade opening spring
#663
#615
Oil: MZ-800S
To contact surface
Note:
When replacing the following components with new ones in the repair of the lens barrel, it is necessary
to inspect and adjust the FFD. So, after inspecting and adjusting the FFD, assemble the barrier unit as
mentioned in A10 and A11.
・ 1st lens group unit (B601)
・ 2nd lens group unit (6B999-112)
・ 3rd lens group unit (B603)
・ CCD mount unit (6B999-113)
To Next Page
Loading...
