210
t
6 Select [Done].
Highlight [Done] and press J.
A n icon will be displayed in
the top control panel. To exit
without taking a multiple
exposure, select [Multiple
exposure] > [Reset] in the
shooting menu.
7 Frame a photograph,
focus, and shoot.
In continuous high-speed and continuous low-
speed release modes (pg. 86), the camera will
record all exposures in a single burst. In single-frame release
mode, one photograph will be taken each time the shutter-
release button is pressed; continue shooting until all
exposures have been recorded (for information on
interrupting a multiple exposure before all photographs are
recorded, see page 212).
The n icon will blink until shooting
ends. When shooting ends, multiple
exposure mode will end and the n
icon will no longer be displayed.
Repeat steps 1–7 to take additional
multiple exposures.
SHOOT
CUSTOM
SHOOT
CUSTOM
To Next Page
Loading...
