Nikon D3X - Page 180

154
r
❚❚ Copying White Balance from d-0 to Presets d-1–d-4
Follow the steps below to copy a measured value for white
balance from d-0 to any of the other presets (d-1–d-4).
1 Select L ([Preset
manual]).
Highlight [Preset manual] in
the white balance menu (pg.
140) and press 2.
2 Select a destination.
Highlight the destination
preset (d-1 to d-4) and press
the center of the multi
selector.
3 Copy d-0 to the selected
preset.
Highlight [Copy d-0] and
press J.
If comment has
been created for d-0 (pg. 159),
the comment will be copied
to the comment for the selected preset.