Nikon D3X - Active D-Lighting

155
r
❚❚ Copying White Balance from a Photograph (d-1–d-4 Only)
Follow the steps below to copy a value for white balance from a
photograph on the memory card to a selected preset (d-1–d-4
only).
Existing white balance values can not be copied to preset
d-0.
1 Select L ([Preset
manual]).
Highlight [Preset manual] in
the white balance menu (pg.
140) and press 2.
2 Select a destination.
Highlight the destination
preset (d-1 to d-4) and press
the center of the multi selector.
3 Choose [Select image].
Highlight [Select image] and
press 2.