259
Q
D The USB Cable Clip
To prevent cable from being disconnected, fasten the clip as shown.
D USB Hubs
Connect the camera directly to the computer; do not connect the
cable via a USB hub or keyboard.
5 Turn the camera on.
If [Mass Storage] is selected for [USB]
(pg. 257), c will be displayed in the
control panels and viewfinder, and the
PC connection indicator will flash in the
top control panel (camera displays do
not change if [MTP/PTP] is selected).
6 Transfer photographs.
Transfer photographs to the computer as described in the
online help for Nikon Transfer.
To view the online help, start
Nikon Transfer and select [Nikon Transfer help] from the Nikon
Transfer [Help] menu.
D During Transfer
Do not turn the camera off or disconnect the USB cable while transfer is in
progress.
Power switch
To Next Page
Loading...
