Chapter 1 Microscopy Procedures
20
Chapter 1-3
Microscopy Procedures
Simple Polarizing Microscopy
17
View the specimen.
Rotate the stage knob to move the target. If the target is not in focus, use the focus knob to adjust the focus.
Strict polarizing microscopy
If you need a retardation measurement or stricter polarizing observation, use a dedicated polarizing
microscope.
To switch to bright-field microscopy
Pull out the analyzer IN/OUT knob to remove the analyzer from the optical path. Remove the polarizer unit
from the field lens.
18
Turn off the power.
Turn off the power switch (press to the “O” position) for the microscope. (The power LED on the front of the main
body will turn off.)
To Next Page
Loading...
Need help?
General
