What to do if dirt or dust appears on the monitor of my Nikon Eclipse Ci-E Microscope and doesn't move when the camera is turned?
If dirt or dust appears on the monitor of your Nikon Microscope and does not move when the camera is turned, the camera itself may be dirty. Detach the camera and clean it following the instructions in the camera's manual.
How to fix a dirty or dusty field of view in my Nikon Eclipse Ci-E eyepiece?
If you see dirt or dust in the field of view of your Nikon Microscope's eyepiece, here's what to check: * If the dirt or dust rotates when you turn the eyepiece, the eyepiece itself is likely dirty. Clean the eyepiece. * If the dirt or dust doesn't rotate when you turn the eyepiece, the issue might be with the specimen, condenser lens, or objective. Try the following: 1. Clean the specimen if the dirt or dust moves when the specimen is moved on the stage. 2. Clean the condenser lens if the dirt or dust goes in and out of view when the condenser is moved up and down while using a low magnification objective. 3. Clean the objective if the dirt or dust disappears when the objective is switched. 4. Ensure the condenser is focused and centered, as an unfocused field dia...
Explains the meaning of warning and caution symbols used in the manual.
Describes symbols displayed on the product for user attention.
Explains system configuration and controls for bright-field microscopy.
Explains system configuration and controls for phase contrast microscopy.
Explains system configuration and controls for simple polarizing microscopy.
Explains system configuration and controls for sensitive polarization microscopy.
Explains system configuration and controls for epi-fluorescence microscopy.
Adjusting image brightness using control knob or ND filters.
Procedures for focusing using stage movement.
Moving the stage using X/Y knobs for specimen positioning.
Adjusting eyepiece diopter for clear vision.
Aligning the condenser for optimal light.
Optimizing contrast, resolution, and depth of focus.
Choosing the correct condenser for the objective.
Restricting illumination to the specimen area.
Distributing light to binocular/camera ports.
Tilting/extending binocular section for comfortable viewing.
Using stage spacer for easier specimen replacement.
Basic operation for changing objectives.
Setting up motorized functions like condenser and LED brightness.
Procedures for using oil immersion objectives.
Procedures for using water immersion objectives.
Advice for optimal phase contrast observation.
Advice for optimal epi-fluorescence observation.
Procedures for capturing images with a camera.
Diagram showing the configuration of microscope system components.
Step-by-step assembly guide for bright-field setup.
Specific assembly notes for phase contrast microscopy.
Specific assembly notes for simple polarizing microscopy.
Specific assembly notes for sensitive polarization microscopy.
Specific assembly notes for epi-fluorescence microscopy.
Instructions for connecting a camera to the microscope.
Troubleshooting problems related to the microscope's optical system.
Troubleshooting problems with power, illumination, and motorized parts.
Guidelines for cleaning lenses and other microscope parts.
Recommendations for storing the microscope to prevent damage.
Information on recommended periodic maintenance checks.
Basic principles of microscope operation and intended use.
Technical specifications of the ECLIPSE Ci-E Nikon Microscope.
Physical characteristics and dimensions of the microscope.
General| Brand | Nikon |
|---|---|
| Model | Eclipse Ci-E |
| Category | Microscope |
| Language | English |
To Next Page
