Chapter 1 Microscopy Procedures
11
Chap. 1-2
Microscopy Procedures
Phase Contrast Microscopy
2
Phase Contrast Microscopy
2.1
System Components and Controls
This section explains an example system configuration and the controls required for a phase contrast microscopy using
the ECLIPSE Ci-E.
Names of components are denoted in the following manner: [Phase turret condenser].
CLAMP
TORQU E
PHASE CONTRAST
0.90 DRY
JAPAN
A
DSC
MODEL ECLIPSE Ci-E
USB REMOTE FOOT SWITCH
NIKON CORPORATION
TOKYO, JAPAN
100–240V~
1.0A
50/60Hz
MADE IN CHINA
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
This Class A digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe A est
confirme à la norme NMB-003 du Canada.
930001
4N75
INSPECTION
EQUIPMENT
70
60
50
40
30
20
10
0
90
80
Condenser focus knob
Condenser centering screw
[Eyepiece]
[Objective]
[Stage]
[Phase turret condenser]
[Tube]
[Nosepiece]
[Main body]
Diopter adjustment ring
Coarse focus torque adjustment knob
Optical path
switching lever
Aperture diaphragm
leve
Coarse focus knob
Fine focus knob
Moving claw of the
s
ecimen holde
Condenser focus knob
Condenser turre
nnular diaphragm centering knob
nnular diaphragm centering knob
clam
screw
[Centering telescope]
[GIF filter]
(green interference filter)
X knob
Y knob
Power switch
Capture button
Nosepiece forward rotation
button
Field diaphragm dial
Coarse focus clamp ring
Coarse focus knob
Fine focus knob
Nosepiece reverse
rotation button
Nosepiece reverse rotation button
Nosepiece forward rotation button
UE
P
O
WER
Grip
AC inle
Input voltage
label
DSC connecto
Lamphouse
FOOT SWITCH
connecto
REMOTE
connecto
USB connecto
Dia-illumination
brightness control knob
Dia-illumination LED
ON/OFF switch