EasyManuals Logo

Nikon eclipse lv150 User Manual

Nikon eclipse lv150
75 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
2
WARNING
1. Intended product use
This microscope should only be used for microscopic observation. Do not use it for any
other purpose. Do not observe such a large sample as to stick out of the stage.
2. Do not disassemble.
Disassembly may cause malfunction, electrical shock, and/or injury. Any injury or damage
due to such an act will not be warranted. Do not disassemble any part other than those
described in this manual. If you experience any problem with the microscope, notify your
nearest Nikon representative.
3. Read the instruction manuals carefully.
For your safety, carefully read this manual and the manuals provided with the other products
to be used with the system. Be sure to read warnings and cautions at the beginning of each
manual in particular.
When the external light source is used:
When you use the external light source using a mercury lamp or so on, handle the lamp with
extreme caution. Read the manual for the light source carefully and observe handling
precautions.
4. Ratings of power supply
The power circuit in this instrument is rated for AC power supplies of 100 to 240 V, 50/60
Hz. When connecting the instrument to a power line, check that the line conforms to the
voltage and frequency ratings mentioned above.
Use of a power line that does not satisfy the ratings may lead to equipment malfunction or
damage or a fire.
5. Power cord
Use only the supplied power cord. Using the wrong power cord could result in damage or a
fire. Also, connect the microscope to a PE (protective earth) terminal, since the microscope
complies with the electric shock protection class I.
And besides, to prevent electrical shock, always turn off the power switch (flip it to “
side) before connecting or disconnecting the power cord.
For details about the specified power cord, see “VIII. Specifications.”
6. Specified light source
This microscope must be used with a specified light source. The following light source
combinations are specified for this microscope.
Illuminator:
Nikon LV-UEPI Universal Epi Illuminator (model LV-UEPI) or Nikon LV-UEPI2
Universal Epi Illuminator (model LV-UEPI2)
Lamphouse:
Nikon LV-LH50PC precentered lamphouse 12V 50W (model LV-LH50PC)
Lamp:
Nikon LV-HL50W 12V 50W LONGLIFE halogen lamp (model LV-HL50W), or non-
Nikon 12V 50W SHORTLIFE halogen lamp (model OSRAM HLX 64610, OSRAM
HLX 64611, or PHILIPS 7027)
If you wish to buy these lamps, contact your nearest Nikon representative.

Table of Contents

Other manuals for Nikon eclipse lv150

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nikon eclipse lv150 and is the answer not in the manual?

Nikon eclipse lv150 Specifications

General IconGeneral
BrandNikon
Modeleclipse lv150
CategoryMicroscope
LanguageEnglish

Related product manuals