Nikon eclipse lv150 - Microscope Assembly: Stage and Nosepiece; Attaching Stage, Holder, and Manual Nosepiece

46
Assembling the ECLIPSE LV150/LV150A
• When using the illuminator LV-UEPI
6x6
stage
Holder Holder
3x2
stage
LV150/LV150A
Microscope main body
SubstageSubstage 2
(for stages
by other
manufacturer)
BD quintuple
nosepiece
Universal
quintuple
nosepiece
Standard
sextuple
nosepiece
BD objective Epi objective
6x6
stage
Holder Holder
3x2
stage
SubstageSubstage 2
(for stages
by other
manufacturer)
BD quintuple
nosepiece
Universal
quintuple
nosepiece
Standard
sextuple
nosepiece
BD objective Epi objective
Power cord
Lamp
cable
LV150/LV150A
Microscope main body
Power cord
Lamp
cable
Eyepiece
12V 50W
halogen lamp
Various filters
LV-UEPI illuminator
LV-TI3
eyepiece tube
Dummy slider
Analyzer
slider
Dummy
slider
or
Analyzer slider
Filter sliders
(x2)
Lamphouse
Lamphouse
12V 50W
halogen lamp
Various filters
Fiber
adapter *
Light guide
fiber *
or
Light source *
Eyepiece
Dummy
slider
Polarizer
slider
Filter slider (x2)
Analyzer slider
Filter cube
(Two cubes max.)
Compensation filter
(attached with the fiber adapter)
LV-UEPI2 illuminator
LV-TT2
eyepiece tube
or
lambda plate slider
or
* It is installed if the brightness of the specified light source is
less than the desired brightness for the episcopic microscopy
or so on. (Please take note that if a light source other than the
specified ones are installed onto this microscope, this
microscope system will not be treated as a TUV/SEMI
approved product.)
• When using the illuminator LV-UEPI2