Chapter 4 Assembly
107
Attaching the Shielding Plate
Attach the shielding plate to the arm end.
1. Turn the eyepiece tube 90°, and fix it as shown in
the figure.
(See (2) Changing the direction of the eyepiece tube,
removing and attaching the eyepiece tube in “4.2.1
Basic Configuration (for Bright-field Microscopy.”)
2. Attach the shielding plate to the arm end as shown
in the figure, and tighten two fixing screws using a
tool supplied with the filter set.
3. Turn the eyepiece tube back to the observation
position, and fix it.
Fixing screws and tool
The fixing screws and tool are supplied with the Dia-FL
Set GFP-B.
(1) Turn the eyepiece tube 90°.
(2) Attach the shielding plate using two screws.
(3) Turn the eyepiece tube back to the original position.
Attaching the shielding plate
Fixing screw
Shielding plate
To Next Page
Loading...
