How to fix phase contrast slider is not at the click position on Nikon ECLIPSE Si Microscope?
- TTiffany FordSep 4, 2025
If the phase contrast slider on your Nikon Microscope is not at the click position, move the slider until it clicks.
How to fix phase contrast slider is not at the click position on Nikon ECLIPSE Si Microscope?
If the phase contrast slider on your Nikon Microscope is not at the click position, move the slider until it clicks.
What to do if the fluorescence image is dark on my Nikon Microscope?
To brighten a dark fluorescence image on your Nikon Microscope, adjust the illumination by rotating the brightness control knob close to the maximum position.
How to fix aperture diaphragm closed too far for image not bright enough on Nikon ECLIPSE Si?
If your Nikon Microscope image is not bright enough and the aperture diaphragm is closed too far, you should open it properly.
How to fix field diaphragm closed too far for image not bright enough on Nikon ECLIPSE Si?
If your Nikon Microscope image is not bright enough and the field diaphragm is closed too far, you should open it properly.
How to adjust brightness control knob for image too bright on Nikon ECLIPSE Si Microscope?
If the setting of the brightness control knob makes the image from your Nikon Microscope too bright, adjust the brightness by rotating the brightness control knob.
How to adjust brightness control knob for image not bright enough on Nikon Microscope?
If the setting of the brightness control knob makes the image from your Nikon Microscope not bright enough, adjust the brightness by rotating the brightness control knob.
How to fix EX filter slider is not at the click position on Nikon ECLIPSE Si?
If the EX filter slider on your Nikon Microscope is not at the click position, move the slider until it clicks.
How to fix BA filter slider is not at the click position on Nikon ECLIPSE Si?
If the BA filter slider on your Nikon Microscope is not at the click position, push in the slider all the way and move the slider until it clicks.
What to do if specimen rises from stage surface on Nikon ECLIPSE Si?
If the specimen rises from the stage surface on your Nikon Microscope, stabilize it using the holder.
What type of immersion oil should I use to prevent fluorescence with Nikon Microscope?
If the immersion oil on your Nikon Microscope is emitting fluorescence, use a low-fluorescence oil (Nikon immersion oil) specified by Nikon.
Brand | Nikon |
---|---|
Model | ECLIPSE Si |
Category | Microscope |
Language | English |
Explains symbols on the product for user safety.
Defines WARNING and CAUTION symbols used in the manual.
Describes the basic observation method using diascopic illumination.
Explains the technique for observing unstained, colorless specimens.
Details the method for measuring polarization and refraction states.
Outlines the procedure for observing specimens stained with fluorescent dye.
Describes the technique for observing unstained specimens on a dark background.
Visual representations of how different parts connect for various configurations.
Step-by-step assembly for the primary bright-field microscopy setup.
Instructions for setting up the microscope for phase contrast observation.
Lists common issues related to image quality and appearance.
Covers operational difficulties such as focusing and image integration.
Addresses issues related to illumination and power supply.