How to brighten diascopic illumination on Nikon ECLIPSE Si Microscope?
If the diascopic illumination of your Nikon Microscope isn't bright enough, try these steps: First, adjust the illumination by turning the brightness control knob almost to the maximum position. If that doesn't fully resolve the issue, widen the aperture diaphragm to allow more light to pass through.
Why does illumination turn off when left idle on Nikon Microscope?
If the illumination on your Nikon Microscope turns off when left idle, operate controls such as the illumination on/off button, the brightness control knob, and the nosepiece. To prevent illumination from turning off automatically, turn off ECO mode. Also, you can change how long to wait before entering sleep mode in the settings.
How to stop brightness of illumination changing when objectives are switched on Nikon ECLIPSE Si?
To prevent the brightness of the illumination from changing automatically when objectives are switched on your Nikon Microscope, turn off light intensity management.
How to fix binocular images that are not integrated on Nikon Microscope?
To resolve binocular images that are not integrated on your Nikon Microscope: * Ensure the interpupillary distance is correctly adjusted. * Make necessary adjustments.
How to adjust brightness control knob for image not bright enough on Nikon Microscope?
If the setting of the brightness control knob makes the image from your Nikon Microscope not bright enough, adjust the brightness by rotating the brightness control knob.
How to adjust brightness control knob for image too bright on Nikon ECLIPSE Si Microscope?
If the setting of the brightness control knob makes the image from your Nikon Microscope too bright, adjust the brightness by rotating the brightness control knob.
How to fix field diaphragm closed too far for image not bright enough on Nikon ECLIPSE Si?
If your Nikon Microscope image is not bright enough and the field diaphragm is closed too far, you should open it properly.
How to fix aperture diaphragm closed too far for image not bright enough on Nikon ECLIPSE Si?
If your Nikon Microscope image is not bright enough and the aperture diaphragm is closed too far, you should open it properly.
What to do if the fluorescence image is dark on my Nikon Microscope?
To brighten a dark fluorescence image on your Nikon Microscope, adjust the illumination by rotating the brightness control knob close to the maximum position.
General| Brand | Nikon |
|---|---|
| Model | ECLIPSE Si |
| Category | Microscope |
| Language | English |
Explains symbols on the product for user safety.
Defines WARNING and CAUTION symbols used in the manual.
Describes the basic observation method using diascopic illumination.
Explains the technique for observing unstained, colorless specimens.
Details the method for measuring polarization and refraction states.
Outlines the procedure for observing specimens stained with fluorescent dye.
Describes the technique for observing unstained specimens on a dark background.
Visual representations of how different parts connect for various configurations.
Step-by-step assembly for the primary bright-field microscopy setup.
Instructions for setting up the microscope for phase contrast observation.
Lists common issues related to image quality and appearance.
Covers operational difficulties such as focusing and image integration.
Addresses issues related to illumination and power supply.
To Next Page