8 Specifications
2 Performance Properties
E-48
(9) Focusing
mechanism
Fine focus knob graduation: 2 μm per graduation
Fine focus knob travel: 0.2 mm up or down per turn
Coarse focus knob travel: About 37.7 mm up or down per turn
Vertical travel range for revolving nosepiece:
7 mm up and 2 mm down
from the reference position (stage surface)
(10) Photomicrographic
equipment
(for TS100-F/
TS100LED-F MV only)
Vertical tube: Accepts C-mount direct vertical tube
attachments and photomicrographic
vertical tube
Optical path changeover knob: PHOTO position
(observation 0% : vertical tube 100%)
BINO position
(observation 100% : vertical tube 0%)
(11) Accepts episcopic-fluorescent attachment
(12) Illumination light
source
■
TS100/TS100-F
Lamp Rating: 6 V-30 W halogen lamp (PHILIPS 5761)
Average lamp lifetime: 100hrs
Output Rating: 6 V 5 A max.
■
TS100LED MV/TS100LED-F MV
White LED
(13) Input ratings
■
TS100/TS100-F (Model for 100, 110 and 120V AC areas)
• Input voltage: Select from 100 V, 110 V or 120 V AC by
relocating the fuse holder in the AC inlet.
• Frequency: 50/60 Hz
• Rated current: 0.8 A or less
• Voltage fluctuation: ±10%
• Fuse rating: 250 V, 1 A time-lag, low-breaking type
5x20 miniature fuse x2
■
TS100/TS100-F (Model for 220, 230 and 240 V AC areas)
• Input voltage: Select from 220 V, 230 V or 240 V AC by
relocating the fuse holder in the AC inlet.
• Frequency: 50/60 Hz
• Rated current: 0.4 A or less
• Voltage fluctuation: ±10%
• Fuse rating: 250 V, 1 A time-lag, low-breaking type
5x20 miniature fuse x2
■
TS100LED MV/TS100LED-F MV
100 to 240 VAC, 50/60 Hz, 0.1 A or less
To Next Page
Loading...
Need help?
General
