Nikon SB-5000 Reference Manual

E-23
E
Functions
En-01
■ Setting the zoom head position manually
In order to change the zoom head position to one that does not match
the focal length, the zoom head position must be adjusted manually.
• An
above the indicator appears on the LCD when the zoom
head position is set manually.
• Press the rotary multi selector 4 to highlight the zoom head position
and then use the rotary multi selector to set the zoom head position.
• Rotate the rotary multi selector clockwise or press it 1 2 to increase
the value, and rotate it counterclockwise or press it 3 4 to decrease the
value.
• Zoom head position can also be configured in
menu (0B-11).
• In order to reactivate the power zoom function, press the
button to
display menu and then choose .
■ Power zoom function canceled
Power zoom function can be canceled in the setup menu (0B-24).
• An
above the indicator appears on the LCD when the power
zoom function is canceled.
• The zoom head position must be manually set. The zoom head position
does not automatically change when the lens focal length is changed,
the lens is replaced or the Speedlight is turned off/on.
• To set the zoom head position manually, see “Setting the zoom head
position manually.”

Nikon SB-5000 Specifications

General

Type	-
Product color	Black
Flash coverage	24 - 200 mm
Flash guide number	55 m
Wireless connection	Yes
Approximate recycling time	2.6 s
Brand specific flash systems	i-TTL (Nikon)
Battery type	AA
Number of batteries supported	4

Weight and Dimensions

Depth	137 mm
Width	73 mm
Height	103.5 mm
Weight	420 g