Chapter 8 Functions and Operations of the Devices
124
LCD indications
1st page
1: Total magnification (zoom magnification x objective
magnification x eyepiece magnification)
(Example) [MAG: 236.25x]
2: Zoom magnification
(Example) [ZOOM: 15.75x]
3: Objective magnification
(Example) [OBJ: 0.75x]
4: Eyepiece magnification
(Example) [EP10x]
5: Diascopic LED light intensity
(Example) [LEDDIA _______ ]
6: Field of view
[
○○
] Stereoscopic view or [
○
] Vertical view
1 6
2
3 4
5
2nd page
1: Actual field of view
(Example) [FOV: 24.44 mm]
2: Z-coordinate
(Example) [Z: 100.000 mm]
3-6: Filter cube name (all)
(Example) [1: GFP-B]
7: Field of view
[
○○
] Stereoscopic view or [
○
] Vertical view
1 7
2
3 4
5 6
10.2
AZ-FSW Foot Switch
The AZ-FSW Foot Switch is a controller that enables a pedal to be used for focus and zoom operations.
The foot switch is connected to the FOOT connector of the P2-CTLA Control Box. To use the foot switch, the P2-RC Remote
Controller must be connected to the P2-CTLA Control Box.
PHOTO CTRL
AZ-FSW Foot Switch
(4) CTRL connector
(5) PHOTO connector
(2) Right rear of the foot pedal
(Motorized magnification UP
switch)
(2) Right front of the
foot pedal
(Motorized
magnification
DOWN switch)
(1) Left rear of the foot pedal
(Motorized focus unit
Z-coordinate UP switch)
(1) Left front of the foot
pedal
(Motorized focus unit
Z-coordinate DOWN
switch)
(3) Foot rest
A
Connector attachment section
(viewed from arrow A)
To Next Page
Loading...
