EasyManua.ls Logo

Nikon WP-N3 - O-Rings; O-Ring Maintenance; Changes in Altitude; Altitude Pressure Considerations

Nikon WP-N3
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
vii
En
❚❚ O-Rings
Observe the following precautions when handling O-rings:
The O-ring requires periodic replacement. Replace the O-ring immediately if it is damaged,
cracked, warped, or has lost elasticity. O-rings should be replaced at least once a year; do not
use a worn O-ring or a type of O-ring not designated for use in this product.
To prevent damage to the O-ring, use the O-ring remover when removing the ring from
the case. Do not use metal objects or objects with sharp points when removing the O-ring.
Do not use force when removing or positioning the O-ring. Excessive force may perma-
nently stretch the ring, causing the case to leak.
To prevent wear, use only silicon grease designated for use with this product (
0
25). Do not
use COOLPIX or NIKONOS O-ring lubricant (grease) or other types of silicon grease.
❚❚ Changes in Altitude
Changing air pressure due to changes in altitude may damage case or prevent the case from
opening. Observe the following precautions:
If possible, include the case in your carry-on baggage when travelling by air. When packing
the case with checked luggage, leave the case open or remove the O-ring.
When travelling from high to low altitudes, open the case periodically to equalize the pressure.
D
Important!
The WP-N3 waterproof case is for use with compatible cameras only. Do not place other cam-
eras in the WP-N3.

Table of Contents

Related product manuals