nilan CTS602 - Show Data

Show data
STAUS
HEATING
BYPASS
CLOSED
PANEL
T15 20°C
EXSTERNAL
T10 21°C
HUMIDITY
100%
CO
2
566ppm
INLET
T2 21°C
EXHAUST
T3 22°C
FRESHAIR
T8 15°C
OUTLET
T4 13°C
INLET
FLOW 2
WATER
T9 8°C
EXHAUST
FLOW 2
SOFTWARE
1 2.33
SOFTWARE
2 1.04
TYPE
COMFORT
ENTER
SHOW DATA
1
2
3
4
5
7
6
8
1. PANEL T15 20°C Room temperature measured at T15 (sensor in CTS602 panel)
2. EXTERNAL T10 21°C T10 is an external sensor that can be fitted in an extraction fitting in the
accommodation zone. T10 can be selected as the governing room sensor in
the service menu (See assembly guide).
3. CO
2
566ppm In units with CO
2
sensor, CO
2
concentration is shown.
4. INLET T2 21°C T2 will show on units with no heater. T7 will show on units with heater.
5. EXHAUST T3 22°C Sensor in extraction air. T3 can be selected as the governing room sensor in
the service menu (See assembly guide).
6. WATER T9 8°C T9 will show on units with water heater.
7. SOFTWARE 1 2.33 Software version installed on the unit.
8. SOFTWARE 2 1.04 Software version installed on control panel.
Actual operating data can be read off under the SHOW DATA menu.
Comfort 200 Top (English)
BY NILAN
11