Quick guide
Control panel
Functions
The CTS602 control panel offers the following functions:
1. Light diode Constant yellow
light:
Flashing yellow
light:
The bypass damper is open
The unit is in alarm mode
2. Text field Text is shown on 2 lines, each of 8 characters.
The upper line shows a help text.
The lower line shows the related setting values for the help text.
3. ESC To go to the main menu
4. ▲ To change the value
5. ▼ To change the value
6. ENTER To activate and save the chosen value
7. OFF To switch off the unit
8. ON To switch on the unit
If no button is pressed for a period of a minute, the control system will automatically return to the main
menu.
If you are programming when the control system returns to the main menu, all data will be saved, but
only if you previously have saved them by pressing ENTER. Flashing values and text will NOT be saved.
It is always possible to go back to your programming and resume from where you left off.
4
To Next Page
Loading...
