Need help?Do you have a question about the nilan CTS602 HMI and is the answer not in the manual?
Essential safety guidelines, including power supply and heat pump considerations.
List of supplied documents and information on downloading manuals.
Location of gateway ID number and data plates for unit identification.
Explanation of items displayed on the main HMI screen.
Meanings of various icons used in the control panel interface.
Step-by-step guide to changing domestic hot water setpoint via the panel.
How to modify central heating setpoints and weather compensation curves.
How warnings and alarms are indicated, displayed, and reset.
Overview of how to navigate through the unit's settings menu structure.
Detailed instructions for checking and cleaning the unit's particle filter.
Annual checks for the safety valve and sacrificial anode for system integrity.
Maintenance of the outdoor unit and required heat pump inspections.
Turning the unit on/off and selecting operation modes like Auto, Winter, Summer.
How to view alarm details and clear active warnings or alarms.
Monitoring status, operation mode, temperatures, and capacity.
Accessing information about the unit's hardware and software versions.
Correctly setting year, month, day, hour, and minute for accurate logging.
Setting up and editing weekly programs for heating and hot water functions.
Configuring start times and specific functions within week programs.
Adjusting domestic hot water setpoint and supplementary electric heater parameters.
Configuring weekly legionella disinfection cycles and temperatures.
Using predefined or manual curves to regulate heating supply temperature.
Modifying minimum setpoints, offsets, and curve points for heating control.
Visual representation of how supply flow temperature varies with outdoor temperature.
Limiting compressor capacity based on time, temperature, or season.
Changing the panel display language from Danish to other available options.
Detailed list of specific alarms, their causes, and initial troubleshooting steps.
Further alarm codes, their causes, and recommended troubleshooting actions.
Troubleshooting for compressor stops, communication errors, and software update issues.
Procedure to enable emergency mode for hot water production during unit failure.
Manual mode activation for supplemental electric heating in central heating.
Manual mode activation for central heating circulation pumps.
Enabling manual emergency mode for domestic hot water production.
Caution regarding high water temperatures and scalding risk in manual mode.
Troubleshooting for constant heating operation and high power consumption.
Manufacturer's declaration of compliance with relevant EU directives for the DHW AIR unit.
Manufacturer's declaration of compliance with relevant EU directives for the AIR 9 unit.
Detailed technical data including rated heat output, COP, and energy efficiency ratings.
Continued technical data on heating capacity, COP, and energy efficiency ratings.
Data on energy efficiency, consumption, and temperature settings for hot water production.
Guidelines for proper disposal and recycling of unit components, including refrigerant handling.
To Next Page
General
