14
Week program
You can program the heat pump unit to run in accordance with specific settings at fixed times during the week via a week program. For
both domestic hot water and central heating, the set point can be moved up or down during selected periods. In this way, the weekly
program can work well together with the weather compensation. It is also possible to completely block domestic hot water or central
heating in periods.
> Week program
On the main screen in the top righthand corner of the control panel the icon for the week program is displayed when this
function is active.
> Select program Settings:
Default setting:
Description:
De-activated / Program 1 / Program 2 / Program 3
De-activated
The control system allows you to set 3 programs to meet the
daily operational needs of the user.
If the week program is deactivated, the operation of the unit will
be controlled by ??
> Edit program Settings:
Description:
Program 1 / Program 2 / Program 3
Under the individual program, you can set the operation of the
heat pump unit with regards to days of the week and functions
> Program 1-3 Settings:
Description:
Monday / Tuesday / Wednesday / Thursday / Friday / Saturday
/ Sunday
Monday
For each day of the week, you select which function you want
the heat pump unit to operate in accordance with on the individ-
ual weekday.
> Monday - Sunday Settings:
Description:
Function 1 / Function 2 / Function 3 / Function 4 / Function 5 /
Function 6 / Copy next day
Here the functions are built with regards to the desired opera-
tion of the unit.
Functions 1-4 are factory-built, but they can be changed as
explained below.
Function 6 is deactivated as default, but this can also be
changed as instructed below.
‘Copy next day’ is used when you want to use the same settings
the following day. Select ‘Copy next day’ and .....++++
> Function 1 - Function 6 Settings:
Description:
Start time / Domestic hot water / Central heating
Function 1: 00:00 / Setpoint +5°C / Setpoint +5°C
Function 2: 11:00 / Setpoint +0°C / Setpoint +0°C
Function 3: 17:00 / Setpoint -5°C / Setpoint -5°C
Function 4: 21:00 / Setpoint +0°C / Setpoint +0°C
Function 5: Deactivated
Function 6: Deactivated
> Start time Settings:
Description:
De-activated / 00:00 - 23:45
Set the time for the program to start. The program then runs in
accordance with the selected values until the next change in the
week program.
> Domestic hot water Settings:
Description:
Off / Setpoint -5°C - Setpoint +5°C
This is where you select at which temperature the production of
domestic hot water is activated in relation to the selected set-
point for domestic water.
> Central heating Settings:
Description:
Off / Setpoint -5°C - Setpoint +5°C
This is where you select at which temperature the production of
central heating is activated in relation to the selected setpoint
for central heating.
> Copy next day Description: When you have entered some values for the program for a par-
ticular day, you will have the option to copy and use the same
values the following day.
> Reset program Settings: This is where you reset the selected program by pressing the
"Approve" icon.
To Next Page
Loading...
Need help?
General
