31
Disposal
The environment - part of the solution
At Nilan A/S we recognize our responsibility in minimizing the environmental impact of our products. We consider the impact on the
environment in all aspects of production, operation and subsequent disposal. We recognize our responsibility in minimizing consump-
tion of resources. We work continuously to improve our products and the production process in order to limit our impact on the envi-
ronment.
Ventilation unit
Nilan units consist mainly of recyclable materials. They must, therefore, not be mixed with household waste, but
must be delivered to your local recycling center for disposal.
Disposing of DHW AIR indoor unit
The only tools you will need is a Torx 25 screwdriver and, perhaps, a pair of diago-
nal pliers for cutting wires.
1. Circuit board and electronics are pulled out and handed in by electronic waste
2. The hot water tank DHW, buffer tank and cabinet are handed over for metal
waste
Disposing of AIR outdoor unit
1. Fans are dismantled and handed in by electronic waste
2. Loosen the screws of the door. Circuit board and electronics that have been
placed behind the door are pulled out and handed in by electronic waste
3. Condensation drain hoses are handed in as soft plastic waste
4. The heat pump:
ATTENTION
When disposing of units with heat pumps, it is important to contact the
local authorities for information about the correct disposal procedure.
The heat pump contains the refigerant R410a, which is harmful to the
environment if not handled correctly.
To Next Page
Loading...
Need help?
General
