nilan CTS602 - Show Alarms

Show alarms
AUTO
>2<
19°C
ENTER
16-05-06
FR 11:32
ENTER
00-00-00
FR 00:00
ENTER
ENTER ENTER
ALARM 71
DEFROST
SHOW
ALARMS
ALARM 19
FILTER
ALARM 7
FROST
ALARMLOG AL 1: 71
DEFROST
AL 2: 19
FILTER
AL 3: 7
FROST
16-05-06
FR 11:32
STATUS
ALARM
T1 20°C
T2 20°C
OUT 1-8
00000000
OUT 9-16
00000000
OUT 17-24
00000000
T3 0,00
T4 0,00
2
1
3
4
1. Alarm reset Alarms can be reset individually (inactive alarms only). When the display
shows ”Alarm 0 None” all alarms have been reset.
2. ALARM 19 FILTER Shows from 0-3 active alarms. The newest and most critical alarms are shown
first. The list will be deleted in the event of power outage.
3. ALARM LOG Restored after power outage. Shows the 16 most recent alarms. AL 1 is the
newest.
4. T3 0.00 T4 0.00 Alarm log data shows data from the time of the alarm.
When the unit is in alarm mode, the yellow diode on the CTS 602 control panel will flash.
The SHOW ALARMS menu shows the unit's alarm status and the time of the alarm. Alarms can also be
reset in this menu.
8