16
1)
Options / model variants
Original instructions
9.3 EU Declaration of
Conformity
9.2 Guarantee Our general conditions of
business are applicable with
regard to the guarantee.
Unauthorised modifications
to the appliance, the use of
incorrect accessories, spare
parts and cleaning chemicals in
addition to using the appliance
in a way other than for the
intended purpose exempt the
manufacturer from any liability
for the resulting damage.
US only:
This warranty is in effect from
the first day of purchase by the
end user.
Each machine will have one
(1) year coverage, from date
of purchase by the end user,
covering parts found defective
due to faulty components,
materials and/or bad
workmanship. Not included in
this warranty coverage are parts
found defective due to:
- Normal wear and tear (such
as seals, valves, pistons,
bearings, etc.)
- Machine working under ab-
normal conditions.
- Machines being misused.
- Machines being repaired or
tampered with by unauthor-
ized person(s).
- The use of parts other than
Nilfisk Cleaning Systems,
Inc. original spare parts and/
or accessories.
The burner coil on all Nilfisk
Cleaning Systems, Inc. hot
water/steam cleaners is under
warranty for two (2) years
against defects, and the high
pressure hose is covered for an
initial 30 days, under the same
conditions described above.
Nilfisk Cleaning Systems, Inc.
will cover labor by an authorized
Nilfisk CSI Dealer for a 12-month
period after the date of purchase
of the machine by the end user.
No other costs, other than laid
out in this warranty program, will
be covered by the warranty.
Dated, End-User proof of
purchase must be submitted
with any claim for Warranty
Service.
We,
Nilfi sk A/S
Kornmarksvej 1,
DK-2605 Broendby
DENMARK
Hereby declare, that the
Product: HPW - Professional - Mobile
Description: 230V 1~, 400V 3~,
50/60Hz, IPX5
Type: MH 4M*
Are in compliance with the following
standards:
EN 60335-1:2012
EN 60335-2-79:2012
EN 55014-1:2006+A1:2009+A2:2011
EN 55014-2:1997+A1:2001+A2:2008
EN 61000-3-2:2014
EN 61000-3-11:2000
EN 50581:2012
Following the provisions of:
Machinery Directive 2006/42/EC
EMC Directive 2004/108/EC
RoHS Directive 2011/65/EC
Noise Emission Directive 2000/14/EC
– Conformity assessment procedure ac-
cording to Annex V.
- Measured noise level [dB]: 75-80
- Guaranteed noise level [dB]: 91-94
Hadsund 04-03-2015
Anton Sørensen
Senior Vice President – Global R&D
To Next Page
Loading...
Need help?
General
