Nilfisk-Advance Micromatic M17B User Manual

Micromatic
TM
M17B
Micromatic
TM
M17E
SERVICE MANUAL
Advance model: 908 7057 020
908 7058 020
9097091000(1)2007-06

Nilfisk-Advance Micromatic M17B Specifications

General

Brand	Nilfisk-Advance
Model	Micromatic M17B
Category	Floor Machine
Language	English

Summary

Manual Overview

Micromatic M17B/M17E Service Manual

Introduction to the service manual for Micromatic M17B and M17E models.

General Information

Machine Lifting and Transportation

Safety guidelines for lifting and moving the machine.

Safety Precautions

General safety warnings, symbols, and precautions for operation.

Other Reference Manuals

List of additional manuals available from Advance.

Maintenance

Scheduled Maintenance

Procedures and intervals for routine maintenance tasks.

Maintenance Tables

Tables detailing maintenance schedules for M17B and M17E models.

Technical Data

General Specifications

Physical and dimensional data for the machines.

Performance Specifications

Operational performance metrics like vacuum, power, speed.

Machine Nomenclature

Component Identification

Lists and numbers components shown in diagrams for identification.

Solution System

Solution Tank Cleaning

Procedure for cleaning the solution tank.

Solution Filter Cleaning

Procedure for cleaning the solution filter.

Solution Flow Control and Solenoid Valve Procedures

Solenoid Valve Disassembly/Assembly

Steps for disassembling and reassembling the solenoid valve.

Solution System Troubleshooting

Troubleshooting Solution System

Common issues and solutions for the solution system.

Brushing System

Brush Motor Electrical Input Check

Procedure to check the electrical input of the brush motor.

Brush Motor Carbon Brush Check/Replacement

Guide for checking and replacing brush motor carbon brushes.

Brush Motor and Reduction Unit Disassembly/Assembly

Steps to disassemble and reassemble the brush motor and reduction unit.

Troubleshooting Brush System

Common problems and solutions for the brushing system.

Recovery Water System

Tank and Vacuum Grid Cleaning

Procedure for cleaning the recovery tank and vacuum grid.

Vacuum System Motor Electrical Input Check

Procedure to check the electrical input of the vacuum motor.

Vacuum System Motor Carbon Brush Check/Replacement

Guide for checking and replacing vacuum motor carbon brushes.

Vacuum System Motor Disassembly/Assembly

Steps to disassemble and reassemble the vacuum motor.

Squeegee Disassembly/Assembly

Procedures for disassembling and reassembling the squeegee.

Squeegee Cleaning/Blade Replacement

Guide for cleaning squeegee and replacing worn blades.

Troubleshooting Recovery Water System

Common issues and solutions for the recovery water system.

Other Systems

Machine Speed Adjustment

Procedure for adjusting the machine's operating speed.

Brush/Pad-Holder Deck Disassembly/Assembly

Steps for disassembling and reassembling the brush/pad-holder deck.

Electrical System

Battery Removal/Installation and Setting

Procedures for removing, installing, and setting batteries.

Charging Curves Setting

How to set charging parameters for different battery types.

Battery Charging

Instructions and safety guidelines for charging the batteries.

Electronic Board Replacement

Steps for replacing the electronic board.

Fuse Check/Replacement

Procedure for checking and replacing fuses.

Component Location

Identifies the location of various electrical components.

Wiring Diagram

Electrical wiring diagrams for different models/versions.