4
1)
Options / model variants
Original instructions
1. Insert clamp into the
holder on the sliding
guard:
High-pressure jet
lance
1)
clamp
3.6 Fill up tank for Nilfisk
AntiStone
1)
1. Fill up Nilfisk Anti-Stone/wa-
ter softener reservoir with the
sample bottle
1)
provided. Nil-
fisk Anti-Stone prevents any
deposits of scale and acts at
the same time as a corrosion
inhibitor.
For compatibility reasons, use
only the tested „Nilfisk Anti-
Stone“. Order the refill pack in
good time (Order no. 8466, 6 x
1 l).
3.5 Fill up detergent tank
1)
1. Fill up detergent tank with
prediluted detergent.
Capacity see chapter 9.4 Tech-
nical Data
3.3 Install Crank handle
for high pressure hose
reel
1)
1. Pull cap of crank in arrow di-
rection.
2. Align tabs on crank with slot
in axle.
3. Put crank on axle of high
pressure hose reel.
4. Fix crank by pushing the cap.
1.
2.
ø
Ø
STOP
3.4 Fit clamp for high-
pressure jet tube
1)
To Next Page
Loading...
Need help?
General
