EasyManuals Logo

Nilfisk-Advance SMART User Manual

Nilfisk-Advance SMART
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
PROBLEM CAUSE REMEDY 0
- IF YOU HAVE A PROBLEM
Motor does not start.
No power supply.
Thermal cut-out.
Check cable, plug and socket.
Leave to cool.
Suction force is gradually
decreasing.
Nozzle, suction hose or tube
is blocked.
Check for blockage and
remove.
Cord does not rewind fully. Check that the cord is not
twisted or wound unevenly.
Pull the cord out 2-3m and
push down the cord rewind
button.
Vacuum cleaner does not
pick up dirt.
Crack or hole in hose.
Check hose and replace if
required.
Low or decreasing suction
Filter is full with dust.
Please check filter and, if
required, clean as illustrated
in the instructions.
6
CHANGE THE BATTERY
WARNING
1. Never disassemble or recharge the batteries.
2. Never heat up the batteries or throw them into fire.
3. Do not reverse (+),(-) terminals.
4. Dispose the batteries properly.
NOTE
When the vacuum cleaner does not operate, replace the batteries.
If the problem persists, please contact our authorized dealer.
BATTERY TYPE : AA Size
8
DJ68-00316B(NILFISK)-EN 4/15/05 8:57 PM Page 8

Other manuals for Nilfisk-Advance SMART

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nilfisk-Advance SMART and is the answer not in the manual?

Nilfisk-Advance SMART Specifications

General IconGeneral
BrandNilfisk-Advance
ModelSMART
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals