EasyManuals Logo

Nilfisk-ALTO Attix 30 XC User Manual

Nilfisk-ALTO Attix 30 XC
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
17
english
ATTIX 30/50 H/M
6 After finishing work
6.1 Switching the vacuum
cleaner off and storage
1. After picking up hazardous
dust, vacuum clean the out-
side of the cleaner.
2. Switch off the cleaner and
pull the mains plug out of
the socket.
3. Remove the suction hose
form the vacuum cleaner
andclosetheinletfitting(A)
withtheplug(B).
4. Wind up the power cord
onto the handle (C). Be-
gin winding up the cord at
the cleaner end and not the
plug end to prevent the pow-
er cord from tangling up.
5. Empty the dirt tank and
clean the vacuum cleaner.
6. After picking up liquids:
Store the upper section of
the vacuum cleaner sepa-
rately so that the filter ele-
ment can dry.
7. Hang the suction hose with
the floor nozzle (D) in the
brackets and pack the ac-
cessories (E) away.
8. Store the cleaner in a dry
room where it is protected
from unauthorized use.
A
C
D
E
B

Other manuals for Nilfisk-ALTO Attix 30 XC

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nilfisk-ALTO Attix 30 XC and is the answer not in the manual?

Nilfisk-ALTO Attix 30 XC Specifications

General IconGeneral
BrandNilfisk-ALTO
ModelAttix 30 XC
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals