EasyManuals Logo

Nilfisk-ALTO Attix 30 XC User Manual

Nilfisk-ALTO Attix 30 XC
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
23
english
ATTIX 30/50 H/M
3
2
2
7
3
6
3
8
ø
ø
ø
ø
7.2.6 Replacing filter element
"H" (Xtreme Clean
System)
During the following work, ensure
that dust is not unnecessarily
spread around, Wear a P2 breath-
ing mask.
CAUTION! In the case of asbestos
abatement wear additional single-
use clothing.
Never use the vacuum cleaner
without a filter.
A
A
1. Switch off the vacuum clean-
er and pull the mains plug
out of the socket.
2. Open the retaining clamps
(A) and remove the upper
section of the vacuum clean-
er.
Removing the filter elements:
3. Unscrew the screw and open
filter tension part (B).
4. Remove carefully the cas-
settes with filter elements.
5. Place the protective filter
bag over the filter element.
6. Carefully remove the filter
element and close the pro-
tective filter bag with a knot.
7. Dispose of the used fil-
ter element in acordance
with legal regulations.
Inserting the filter elements:
8. Insert new filter elements (C)
into the cassettes (D).
9. Attach the cassettes with the
filter elements onto the up-
per section of the vacuum
cleaner.
10. Fix the filter tension part (B)
and attach the screw.
B
B
B
C
D

Other manuals for Nilfisk-ALTO Attix 30 XC

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nilfisk-ALTO Attix 30 XC and is the answer not in the manual?

Nilfisk-ALTO Attix 30 XC Specifications

General IconGeneral
BrandNilfisk-ALTO
ModelAttix 30 XC
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals