20
ATTIX 30/50 H/M
english
3
2
2
7
3
6
3
8
ø
ø
ø
ø
7.2.3 Replacing the filter bag
"M"
During the following work, ensure
that dust is not unnecessarily
spread around, Wear a P2 breath-
ing mask.
Never use the vacuum cleaner
without a filter.
1. Switch off the vacuum clean-
er and pull the mains plug
out of the socket.
3. Open the retaining clamps
(A) and remove the upper
section of the vacuum clean-
er.
Removing the filter bag:
4. Carefully remove the filter
bag connection from the inlet
fitting (B).
5. Close the filter bag connec-
tion (C) with the slider.
6. Dispose of the filter bag in
accordance with legal regu-
lations.
Inserting the filter bag:
7. Clean the dirt tank.
8. Insert the filter bag in the dirt
tank.
9. Press the bush of the new fil-
ter bag firmly on to the inlet
fitting (D).
10. Attach the upper section of
the vacuum cleaner.
11. Close the retaining clamps
(A). Ensure that the retaining
clamps fit properly.
A
A
3
2
2
7
3
6
3
8
ø
ø
ø
ø
B
C
A
A
D
To Next Page
Loading...
Need help?
General
