EN
ENGLISH
Nilfi sk ALTO Operator’s Manual (EN) - SCRUBTEC 866, 871, 866, Boost 8 and 871C FORM NO. 71492A - 39 -
ELECTRICAL BOX ASSEMBLY
Item Ref. No. Qty Description
1 80249A 3 Screw, M5-.8 x 12MM Hex
2 980643 3 Washer, 7/16 OD x .036 THK
3 962027 3 Screw, 8-32 x 1/2 P.H.
4 61933A 1 Plate, Electrical
5 41068B 1 Controller, I-Drive 24V Traverse
6 80380A 2 Screw, 8-32 x 1 1/4” P.H.
7 56412179 1 Contactor 24 VDC
8 980614 2 Washer, 1/4” Starlock External
9 85391A 2 Screw, 1/4-20 x .625 Pan Hd.
10 Ref. 1 Relay Holder (included in 41061A Harness)
11 54764A 2 Insert, Hex 1/4-20 UNC
12 41075A 1 Relay (Vacuum)
13 Ref. 1 Fuse Holder (included in 41061A Harness)
14 41073A 1 Fuse, 30A (Vacuum / see WARNING below)
15 962979 2 Screw, 6-32 x 1/2 PN ST PH
16 920056 2 Nut, 6-32 E.S.N.A. Nylock
17 Ref. 1 Fuse Holder (included in 41061A Harness)
18 41074A 1 Fuse, 60A (Traverse Motor / see WARNING below)
19 41069B 1 Relay, i-Drive 24V Traverse
20 54763A 7 Insert, Hex #8-32 UNC
[ ] 41065B 1 Harness, Traverse
[ ] 41061A 1 Harness, Machine
WARNING: To reduce the risk of fi re, when replacing fuse, replace only with same type and rating of fuse that comes with ma-
chine.
revised 12/11
To Next Page
Loading...
Need help?
General
